globals:
  - id: led_state
    type: std::string
    initial_value: '"WIFI_SEARCHING"'

# Corrected led_status.yaml looping scripts
script:
  # Pattern 1: Three rapid blinks (Looping)
  - id: led_pattern_wifi_searching
    mode: restart
    then:
      - while:
          condition:
            lambda: 'return true;'
          then:
            - repeat:
                count: 3
                then:
                  - switch.turn_on: switch_led
                  - delay: 100ms
                  - switch.turn_off: switch_led
                  - delay: 100ms
            - delay: 1000ms

  # Pattern 2: Fallback AP active (1 long blink + 3 rapid blinks loop)
  - id: led_pattern_ap_fallback
    mode: single
    then:
      - while:
          condition:
            lambda: 'return true;'
          then:
            - switch.turn_on: switch_led
            - delay: 1000ms
            - switch.turn_off: switch_led
            - delay: 500ms
            - repeat:
                count: 3
                then:
                  - switch.turn_on: switch_led
                  - delay: 100ms
                  - switch.turn_off: switch_led
                  - delay: 100ms
            - delay: 1000ms

  # Pattern 3: Two long blinks (Connected WiFi)
  - id: led_pattern_wifi_connected
    mode: single
    then:
      - while:
          condition:
            lambda: 'return true;'
          then:
            - repeat:
                count: 2
                then:
                  - switch.turn_on: switch_led
                  - delay: 600ms
                  - switch.turn_off: switch_led
                  - delay: 400ms
            - delay: 1500ms

   # Pattern 4: One rapid blink (Transient event for successful MQTT publish)
  - id: led_event_mqtt_success
    mode: queued
    then:
      - switch.turn_on: switch_led
      - delay: 100ms
      - switch.turn_off: switch_led

  # Pattern 5: One long blink (Transient/State event for MQTT fail)
  - id: led_event_mqtt_failed
    mode: restart
    then:
      - switch.turn_on: switch_led
      - delay: 1000ms
      - switch.turn_off: switch_led

  # Pattern 6: OTA update
  - id: led_ota_update_progress
    mode: restart
    then:
      - switch.turn_on: switch_led
      - delay: 200ms
      - switch.turn_off: switch_led

  - id: set_led_state
    parameters:
      state_name: string
    then:
      # 1. Stop all active pattern loops
      - script.stop: led_pattern_wifi_searching
      - script.stop: led_pattern_wifi_connected
      - script.stop: led_pattern_ap_fallback
      - script.stop: led_event_mqtt_success
      - script.stop: led_event_mqtt_failed
      - script.stop: led_ota_update_progress
      # 2. Update global state
      - lambda: 'id(led_state) = state_name;'
      # 3. Route to active pattern
      - if:
          condition:
            lambda: 'return state_name == "WIFI_SEARCHING";'
          then:
            - script.execute: led_pattern_wifi_searching
      - if:
          condition:
            lambda: 'return state_name == "WIFI_CONNECTED";'
          then:
            - script.execute: led_pattern_wifi_connected
      - if:
          condition:
            lambda: 'return state_name == "AP_FALLBACK";'
          then:
            - script.execute: led_pattern_ap_fallback
      - if:
          condition:
            lambda: 'return state_name == "MQTT_SUCCESS";'
          then:
            - script.execute: led_event_mqtt_success
      - if:
          condition:
            lambda: 'return state_name == "MQTT_FAILED";'
          then:
            - script.execute: led_event_mqtt_failed
      - if:
          condition:
            lambda: 'return state_name == "OTA_UPDATE";'
          then:
            - script.execute: led_ota_update_progress